POWERDI is a registered trademark of Diodes Incorporated.
PDS4200H
Document number: DS30596 Rev. 10 - 2
1 of 6
www.diodes.com
October 2012
© Diodes Incorporated
PDS4200H
4A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER
POWERDI
®
Features
• Lower Forward Voltage Drop than Ultrafast Rectifiers
• Very Low Leakage Current
• Soft Recovery Characteristics: Softness Factor (t
b
/t
a
) ≥ 1 (see
figure 8)
• Highly Stable Oxide Passivated Junction
• High Forward Surge Current Capability
• Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
• Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data
• Case: POWERDI5
• Case Material: Molded Plastic, “Green” Molding Compound. UL
Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Finish – Matte Tin annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
• Polarity: See Diagram
• Weight: 0.095 grams (approximate)
Ordering Information (Note 4)
Part Number Case Packaging
PDS4200H-13 POWERDI5 5000/Tape & Reel
PDS4200H-7 POWERDI5 1500/Tape & Reel
Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com.
Marking Information
Top View
Bottom View
LEFT PIN
RIGHT PIN
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
BOTTOMSIDE
HEAT SINK
S4200H = Product type marking code
= Manufacturers’ code marking
YYWW = Date code marking
YY = Last two digits of year (ex: 06 for 2006)
WW = Week code (01 - 53)
K = Factory Designator
YYWWK
S4200H
Green
POWERDI5
Comments to this Manuals